This dual output wall mounted EV charger has the innovative feature of both a Type 2 fixed cable and a Type 2 socket that is capable of charging 2 electric vehicles at once.
When one vehicle is plugged in it will output 7.4kW, when two are plugged in it will automatically share the load and provide 3.7kW to each vehicle and automatically ramp up when one has finished charging.
The Type 2 socket allows you to charge any vehicle, use a Type 2 to Type 1 cable to charge a Japanese imported vehicle while you also charge your NZ new Type 2 vehicle. Or use a Type 2 to Type 2 cable to charge 2x Type 2 vehicles.
The app allows you to set charge schedules, adjust the maximum current overall as well as monitoring power usage.
Plug and charge mode for use with out the app. Or secure mode locked using the app
Scheduled charging – edit and add multiple schedules.
Dynamic load balance to monitor your house hold current.
32A 7.4KW Charging for one vehicle or 3.7kW for two vehicles
IP54 weather proof and can be mounted outdoors with no issues.
Input cable can be installed from the bottom or the back to hide the cable.
Led indicator ring light around the charge port
OCCP 1.6j Compatible
App compatible with Apple and Android
Attached Type 2 cable and Type 2 socket
Dynamic load balance
Optionally install the included CT clamp at the mains and this will monitor your total house draw. If this draw exceeds the maximum limit the charge rate will be reduced to avoid tripping the breaker.
Great if you are on a power plan that offers free power and you want to have all your appliances running at the same time.
200mm x 330mm x 132mm
Over Temperature protection
Overload Current protection
Over/under voltage protection
DC and AC leakage protection (No need to install a Type B RCD to keep the cost of install down)
1x Charger with attached 5m cable
1x CT clamp for load Balance
1x Type 2 cable holder
Save money on your install by picking up an External switch and Type A RCBO, electricians typically charge $300 for both, get ours for $88
No Type B RCD needed when installing, If you have limited room on your switch board pick up one of our mini Type A RCBO at the same time.
Switches inside the charger allow the maximum current to be limited where required. Printed SDOC included