Autel AC Compact Wallbox 7.4kW

This Autel charger has been replaced with our Smart EV charger. 

Autel AC compact charger 7.4kW with Type 2 socket
This is the upgraded AC Maxi charger, it has all the same features in a smaller form factor.

This intelligent charger is designed for both business and residential use and will allow you to charge 4x faster than a plugin 8a charger.

Easily export energy used and monitor your cost of charging for business refunds. Set a timer schedule for off-peak charging and adjust charge current.
There is an electronic locking mechanism to secure the cable in place while charging.

Designed for New Zealand conditions for indoor and outdoor use and can be pedestal mounted.

Universal Type 2 plug and compatible with all vehicles.
Built in WIFI, Bluetooth and LAN.

Dynamic Load balancing
Purchased seperatley the optional energy meter will allow you to futureproof your charging.
Install the Load balancing module at the switch board, this will communicate with the first charger that will communicate to the rest of the chargers over Lan or WIFI. As your business grows and adds additional chargers, they will automatically balance the electrical load without the worry of overloading the mains or an expensive upgrade of the mains cable. Ideal if you will have a large fleet of electric vehicles.

Solar PV Modes:
To use the solar modes a Energy Meter is required sold seperatley.
The energy meter can prevent excess solar going back to the grid by automatically adjusting the charge rate of the car to use the excess energy. Select from 3 modes.
Green Mode – Only using excess energy (+ – 1kW)
Green Priority – Using the excess energy + an additional top up of 6a from the grid when there is no sun.
Speed Priority – Full speed charging.

Autel Charge APP
This polished App allows you to register new RFID cards, set up charge scheduling, monitor your charging and charge history. Set up your cost of power and it will provide reports on how much power you have used in the month and easily export the data for claiming back expenses. You can also set the connector to lock in place to stop your cable from being removed.

Features:

• Built in DC leakage protection RCD-DD
• Wifi, Bluetooth, LAN + RFID reader.
• Charging power of 7kW or 32a
• Dynamic Load Balancing ready
• IP54 outdoor rated protection
• Type 2 Socket with electronic lock.
• Dimensions (H×W×D) 202 × 202 × 115 mm.
• Convenient APP (free download)
• Weather resistant, perfect for outdoor use
• OCPP v1.6 Support
• Easy install, cables can be installed from the back or the bottom.

With OCPP software these chargers can be set up for automatic energy monitoring and reporting for fleet and business to provide staff refunds for charging at home.
Our Kiwi EV OCPP software can be used for energy monitoring at apartments, flats for shared charging where the energy used is billed back to the tenants from the body corporate or owner.
Talk to us about your requirements for the additional OCPP software today.

Monitor Live and historic Charging Data
View the cost to charge and export monthly costs to Excel for reimbursement and tax refunds for your power used.