The Mazda CX5 PHEV has a 17.8kWh battery, this can be fully charged in 90min with a home 7.4kW ev wall charger.
Or if you are using the 10a charger this will take around 8.5 hours to fully charge.
New Zealand specifications
| Item | Specs |
| Battery Size | 17.8 Kwh |
| Range | 59 km WLTP |
| Maximum A.C charge speed | 7.4 kW |
| Maximum D.C charge speed | NA |
| Engine HP combined | 241kW |
| Charge Port | Type 2 |
| Charge port location | Rear Drivers |
The CX80 supports single phase charging so there is no speed gain by using a 3 phase charger. Our 7kW home charger suits most people’s needs and will fully charge overnight. If you want to make the most of night rates and scheduled charging then our smart chargers can do this. Our chargers also have Solar Diversion to charge your car with Solar.
You can choose from the version with a socket on the front and buy a separate cable that can be used for public charging. Or get the version with the cable attached.
Charge times from 0 to 100%
The last 5% slows down as the cells are balanced so the time below is an estimate.
| Charger type | Approximate Charge time 0% to 100% |
| Factory plug in 10a charger | 8.5 Hours |
| 10A Type 2 Plug in charger | 8.5 Hours |
| 16A Charger with caravan socket | 4.25 Hours |
| 32a Wall charger with Socket | 2.5 Hours |
| 32a Wall charger with 6m cable | 2.5 Hours |
| Autel Wall charger | 2.5 Hours |
Also see our Charge time calculator and Charge Cost calculator
There two types of public chargers; DC CCS fast charger and AC chargers.
The CX80 only supports A.C charging.
Type 2 Public AC chargers like the ones you find a super markets, malls, hotels & Motels. You will need to bring your own cable for these. Plug share will show the chargers in your area and you can see what sort of cables are needed.
We recommend a 7kW Type 2 to Type 2 cable. 5m will cover most situations.
The majority of free public chargers use the Type 2 Socket, so this cable will allow you to use the chargers. Note Some public charges have a Type 2 hard wired so a cable is not needed 100% of the time.
Get in touch to find more about our fleet charging solutions. We can supply and arrange the install of the charger and provide the Kiwi EV software to manage the charging and cost tracking across your fleet. This allows for easy reimbursement of power costs for workers charging at home.
With Kiwi EV OCPP software you do the following from a web based platform.
• Run reports for home charging cost reimbursement
• Control access with a swipe card
• Track energy use across the fleet
• Track and view the co2 offset.
If you have any questions then get in touch, we are here to help you with your EV needs.
0224564874
Sales@smartevchargers.co.nz
