Autel Maxi Charger AC Wallbox 7.4kW 4G

Autel Maxi charger 7.4kW with Type 2 socket, 4G, WIFI & Lan

This intelligent charger is designed for both business and residential use and comes with a built in 4g modem for areas with out wifi or for use in an apartment where there is no shared internet.

It features a free smart app that allows you to set up the charger as a pay as you go charger, plug and play home charger or locked down with an RFID card.
Export energy used and monitor your cost of charging for business refunds. Set a timer schedule for off-peak charging and adjust charge current.
There is an electronic locking mechanism to secure the cable in place while charging.

Designed for New Zealand conditions for indoor and outdoor use and can be pedestal mounted.

Universal Type 2 plug and compatible with all vehicles.
Built in 4G, WIFI, Bluetooth and LAN.

Dynamic Load balancing
Purchased seperatley the optional Energy meter will allow you to futureproof your charging.
Install the Load balancing module at the switch board, this will communicate with the first charger over the LAN, the first charger will communicate to the rest of the chargers over Lan or WIFI to manage the load. As your charging needs grow the chargers will automatically balance the electrical load without the worry of overloading the mains or an expensive upgrade of the mains cable. Ideal if you will have a large fleet of electric vehicles.

Solar Modes:
To use the solar modes a Energy Meter is required sold seperatley.
The energy meter can prevent excess solar going back to the grid by automatically adjusting the charge rate of the car to use the excess energy. Select from 3 modes.
Green Mode – Only using excess energy
Green Priority – Using the excess energy + an additional top up of 6a from the grid when there is no sun.
Speed Priority – Full speed charging.

Autel Charge APP
This polished App allows you to register new RFID cards, set up charge scheduling, monitor your charging and charge history. Set up your cost of power and it will provide reports on how much power you have used in the month and easily export the data for claiming back expenses. You can also set the connector to lock in place to stop your cable from being removed.

Features:

• Built in DC leakage protection
• Wifi, Bluetooth, LAN + RFID reader.
• Charging power of 7kW or 32a
• Dynamic Load Balancing ready
• IP65 Protection
• Type 2 Socket with electronic lock.
• Dimensions (H×W×D) 336×187×85mm.
• Convenient APP (free download)
• Weather resistant, perfect for outdoor us
• OCPP v1.6 Support
• Easy install, cables can be installed from the back or the bottom.

With Our Kiwi EV OCPP software these chargers can be set up for automatic energy monitoring and reporting for fleet and business to provide staff refunds for charging at home.
Our OCPP software can be used for energy monitoring at apartments, flats for shared charging where the energy used is billed back to the tenants from the body corporate or owner.
Hotels/Motels can be setup with pay as you go charging.
Talk to us about your requirements for the additional OCPP software today.