15m long Plug in 10a EV Charger Type 1

15m long Plug & Charge EV charge cable. Great when you need extra length on the cable.
These are much safer than hanging the cable out the window or using an extension cord.

This model plugs in to a standard NZ wall plug and is available in Type 1. For Type 2 click here.
Meets All NZ standards and worksafe requirements, Sdoc available on request.

Features:
Input Plug – NZ 10A plug with temp sensor
Output Plug Type 1. If you are looking for Type 2 for a New Zealand new vehicle we have this model
IP65 outdoors rated, we recommend keeping the controller box out of direct weather. The Type 1 end can be used in the rain.
15m Length
Adjust current
Set time delay, 1 hour, 2 hours 3 hours etc
Dual temp display plug temp and internal temp

Safety features
Over Temperature protection
Overload Current protection
Over/under voltage protection
Earth monitoring
DC and AC leakage protection
Crush protection
Standards  IEC62752
Built in temperature protection in the Wall plug.

This will work with the fully electric vehicles below and all Japanese imported EV’s and Hybrids.

All Japanese EVs including but not limited to 
Nissan Leaf & ENV200
Renault Zoe & Kangoo
Mitsubishi iMiev / Outlander