evse test meter AC ev charger tester
EVSE charger test tool - Electric Charging Station Test Adapter - Image 2
EVSE charger test tool - Electric Charging Station Test Adapter - Image 3
evse test meter AC ev charger tester

EVSE charger test tool – Electric Charging Station Test Adapter

$480.00 inc. GST

EVSE tester
Simulate an ev for testing and comissioning ev chargers. Works with Type 1 and Type 2 chargers.

In stock

SKU: evse-test Category:

EVSE Simulator & EV Charger Test Tool

The EVSE Simulator is a professional testing device designed to simulate an electric vehicle (EV), allowing installers and technicians to safely test, commission, and troubleshoot AC EV chargers.

Compatible with:

  • Type 2 socket chargers
  • Type 2 tethered chargers
  • Type 1 tethered chargers (using included Type 1 to Type 2 adapter)

Features

  • PE Test – Check for voltage on the protective earth conductor.
  • Cable Simulation – Select charging cable ratings from 13A to 63A.
  • CP State Simulation – Simulate vehicle connection and charging states.
  • CP Error – Simulate a Control Pilot short-to-earth fault.
  • PE Error – Simulate interruption of the protective earth conductor.
  • Output Indicators – LEDs show charger output voltage on L1, L2 and L3.
  • Voltage Test Points – Convenient terminals for voltage measurements.
  • NZ Load Socket – Connect a load if required during testing.

How to Use

  1. Connect the EVSE Simulator to the charger.
  2. Select 32A on the lower rotary switch and Position A on the upper rotary switch.
  3. Touch the PE test button. If the LED illuminates, voltage is present on earth.
  4. Switch to Position B to simulate a connected vehicle that is not requesting charge.
  5. Switch to Position C to simulate a vehicle ready to charge. Charging should begin
  6. The L1 LED will illuminate when output voltage is present. L1-L3 will illuminate on three-phase chargers.
  7. Press PE Error. Charging should stop and the charger should enter a fault state.
  8. Return to Position A, then B, then C to begin a new charging session.
  9. Press CP Error. Charging should stop and indicate a fault condition.

RCD / 6mA DC Testing

Our Smart EV Chargers brand with built-in RCD testing can perform the test directly through the charger app.

For other charger brands, a compatible multifunction installation tester is required. The tester connects to the EVSE Simulator to perform RDC-DD (6mA DC residual current) testing.

Compatible Testers:

  • Metrel MI 3152 XC
  • Fluke 1664 FC
  • Fluke 1663 FC (firmware update required)
  • Megger MFT1741+

Certified to IEC61010- Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use

Box Includes:
Tester
T1-T2 Adapter
Carry case

Trade pricing: 
Get in touch with us, we do trade pricing on our ev wall chargers.
No installer APP
No min order
No account needed.
3 year parts and labor warranty