EV Charger Pedestal Stand for Wallbox Pulsar

Wallbox pulsar charger Aluminium Pedestal.
This aluminium powder coated EV charger pedestal.

Easily mount your charger outdoors on any concrete or hard surface.
This is a universal pedestal that allows for mounting of the Pulsar by way of riviting the back place on to the Aluminium surface and comes with instructions on how to simply mount the charger.

• 1x Pedestal/Stand
• 4x Expansion bolts for concrete mounting to the floor
• 4x M4*16mm mounting screws for securing the EV charger to the pedestal.
• Cable holder

Protected from the Elements
The EV Charger Pedestal is specially treated to resist corrosive elements, making it suitable for indoor and outdoor use without worry.

Mounting the Wallbox. 
It’s recommended to rivet the back plate on to the pedestal in the desired position.
Then mount the charger on to the back plate.
The Isolator switch can be rivited on the square hole below the charger.

Size:
Height 1300mm
Width 60mm
Base size 240mm x 160mm

Its recommended to pour a 250mm thick concrete pad to mount the pedestal on to. Or using an existing concrete surface.
The existing mounting holes in the images will remain in the post, these are black and are covered by most chargers.
If the wallbox cable is going to come out the back of the charger in to the post, then the hole for this will need to be drilled using a hole saw using the drilling template that comes with the wallbox.