CT Clamp for the Eo Mini Pro 2
The CT clamp allows the mini Pro 2 to perform the following Functions.
Total house Load monitoring.
Most modern houses have a 63A feed. This will need to be checked by your electrician.
If you car is charging at 32A and you have a heat pump, electric hob and other appliances running you could approach the maximum current rating to your house.
The CT clamp will allow the Eo Mini Pro 2 to monitor the total draw. If it starts to approach the maximum it will automatically lower the charge rate.
The charge rate will then increase when the total load drops.
Solar charging
With the addition of this CT clamp installed with Solar panels it will allow the Eo Mini Pro 2 automatically adjust the charging to match the Solar output.
Charging takes a minimum of 6A so if your solar drops below this the car will continue to charge from the mains.
If you need both Solar Charging and total house load monitoring the EO mini pro is capable of doing both. However you will need 2 CT clamps.